Please upgrade your browser for the best possible experience.

Chrome Firefox Internet Explorer
×

TESTING RESULTS: Devouring Microbes, Corrosive Microbes, Lethal Injectors

STAR WARS: The Old Republic > English > Classes > Imperial Agent > Sniper
TESTING RESULTS: Devouring Microbes, Corrosive Microbes, Lethal Injectors
First BioWare Post First BioWare Post

QisaBluevixen's Avatar


QisaBluevixen
02.02.2012 , 01:33 PM | #1
Overview

I had heard some people saying that Corrosive Microbes might not be working. I just respec'ed to Lethality so I decided to test out some of that tree's skills.

Lethal Injectors - Increases the duration of Corrosive Dart by 3 seconds.
Devouring Microbes - Increases the damage dealt by poison effects by [5%/10%/15%] on targets below 30% of max health.
Corrosive Microbes - Corrosive Dart has a [12.5%/25%] chance to tick twice when it inflicts damage.

I tested against level 49/50 turrets southwest of the Business District terminal on Corellia. They're nice because I can back out of range of them and just watch the ticks. I used Fraps to record each attack so I didn't have to write them down quickly (and because of a quirk with Corrosive Microbes [see that section]).

Corrosive Dart usually does its damage in 5 ticks over 15 seconds. The ticks happen at 3/6/9/12/15 seconds. For a given target, each tick does one amount of damage for non-crits and a higher amount of damage for each crit (based on Crit Multiplier). For instance, on a level 50 target my Corrosive Dart did:

314
522
314
314
522

The 314s are non-crits and the 522s are crits. Incidentally, the ticks were the same on the 49 turrets as well as the 50s - not sure if it does the same damage regardless of level, but I suspect it would.

I fired 18 Corrosive Darts at the level 50 turrets (108 ticks) and 8 at level 49 turrets (45 ticks - some died before the last tick).

Lethal Injectors

Lethal Injectors simply adds a 6th tick which does the same amount of damage as the other ticks and this was born out in every one of my test shots.

Verdict: Working

Devouring Microbes

Since my Corrosive Dart ticks always do 314/522 damage per tick, Devouring Microbes 3 should make that 361/600 when the target is below 30% health. In all of my tests, my ticks below 30% health were 362/600. So it seems my 314 ticks are really something like 314.4 rounded down. Additionally, I never saw these larger ticks at health above 30% - even a fraction of a percent above.

Verdict: Working

Corrosive Microbes

The description of this skill seems very straightforward. With level 2, on average we should expect to see 1 or 2 "double ticks" per Corrosive Dart. Obviously, sometimes you'd see more and sometimes you might not get any. Also, the description does not specify that the level of the target should make any difference to the frequency of double ticks.

Before I decided to more formally test this skill, I was running around Ilum attacking mobs with just Corrosive Dart to see how it worked. For instance, did the double ticks appear simultaneously (yes) or was another tick added to the end (no)? At first, I thought it was completely broken; I didn't see any double ticks at all on the first 4 mobs I tried. Finally I saw one on the 5th one. So I went to my usual test area and played around before really testing and noticed that I seemed to get more double ticks on level 49 turrets than on level 50s. That's when I decided to test it more strictly.

I used Fraps to record the tests because I noticed that rarely some double ticks did the same amount of damage each and the numbers nearly overlapped each other visually. I could only tell that there was a double tick by the amount of health the target lost. By recording the fights, I could do the necessary subtraction to find those "hidden" double ticks.

In the end, of the 108 opportunities (i.e. ticks) on level 50 turrets, I only got 8 double ticks (7.4%). On the level 49 turrets, I got 6 double ticks on 45 opportunities (13.3%). Overall, that's 14 double ticks out of 153 opportunities - 9.2%, well below the advertised 25%. Is this enough to be statistically valid? Incidentally, I had another 24 shots in my test that didn't get recorded (forgot to hit Record) and none of them appeared to have a double tick, but I didn't include them in my results since I couldn't be sure without the video that I had no overlapping double ticks.

Verdict: Working, but probably not as well as the tooltip suggests. Could use more testing by others!

This test plus my other one - where I showed that Experimental Explosives didn't impact Corrosive Grenade - makes me wonder just how many of our skills are actually broken.
I don't have a picture because I don't exist ... officially.
Q'isa - Battlemaster Lethality Operative
Qisa Bluevixen - Centurion MM Sniper
LFL in Alderaan Places

TheDeacon's Avatar


TheDeacon
02.02.2012 , 02:08 PM | #2
Suppose that's to be expected of an early, one-point talent that doesn't display its numbers. Horrible news about Experimental Explosives and Corrosive Grenade, too.. uh, just rolled a Sniper going Lethal Grenadier w/ Cybertech, affectionately named Kaboom. Seems there're way too many punched out holes in thse builds right now!

Zerikin_Loukbel's Avatar


Zerikin_Loukbel
02.02.2012 , 02:12 PM | #3
Thanks for the work. Someone posted some numbers in another thread and it seems like the 25% double tick was happening at about half the rate it should have. What about devouring microbes with corrosive grenade and cull ticks?

Toat's Avatar


Toat
02.02.2012 , 02:16 PM | #4
Thank you for doing this.

And yeah, Razor Rounds > Experimental Explosives for the Cull/Cluster Bombs spec.

The Zimco Legacy
CE

DestyOwn's Avatar


DestyOwn
02.02.2012 , 02:19 PM | #5
Are you sending any Tickets concerning Corrosive microbes, because this is a very big difference...

QisaBluevixen's Avatar


QisaBluevixen
02.02.2012 , 02:31 PM | #6
Cull is nearly impossible to test without a combat log. Too many numbers flying around overlapping each other.

I haven't submitted a bug yet for this or the other test I did. I really should get around to that.
I don't have a picture because I don't exist ... officially.
Q'isa - Battlemaster Lethality Operative
Qisa Bluevixen - Centurion MM Sniper
LFL in Alderaan Places

frdrake's Avatar


frdrake
02.02.2012 , 04:10 PM | #7
Thanks for your work on this. I appreciate the cleanliness with which you conduct your tests.

QisaBluevixen's Avatar


QisaBluevixen
02.02.2012 , 04:56 PM | #8
FYI, I created a ticket in-game for this issue.
I don't have a picture because I don't exist ... officially.
Q'isa - Battlemaster Lethality Operative
Qisa Bluevixen - Centurion MM Sniper
LFL in Alderaan Places

Tibbel's Avatar


Tibbel
02.02.2012 , 06:52 PM | #9
Thanks for this testing!

Quote: Originally Posted by QisaBluevixen View Post
Is this enough to be statistically valid?
Well, since you asked...

This test is an attribute test, which means each data point is either a TRUE or a FALSE. Let's set our null hypothesis to say: "The proc rate is 25%."

The null hypothesis is the claim we are trying to test. We can never confirm it through testing, only reject it or fail to reject it with a certain confidence. Confidence is typically denoted as γ or as (1 - α) and is a value between 0 and 1.

The resulting data from the test leads to a p-value, which is the chance that the actual conditions are at least as extreme as the observed. (In this case, it's the chance that you would get the test results you did if the proc rate is actually 25%.) Like confidence, the p-value is also a number between 0 and 1. It's dependent on the hypothesis, the observed data, and the sample size. (Look up the math if you care about it -- I used Minitab.)

If p < α, then we reject the null hyposthesis (i.e. the results are statistically significant); otherwise, we fail to reject it.

So, for your first test, your null hypothesis is: "The proc rate of 2/2 CM is 25%."
Let's say we want to be 95% confident, so α = 0.05.

14 ticks out of 153 trials results in a p-value of: p < 0.001. Since p < α, we can reject the null hypothesis with a confidence of 95%.

In other words: YES, your test results are enough for us to say the proc rate is not 25%.

-----------------------------------------------------------------------------------------

You also conducted a second test, which tested the null hypothesis: "The proc rate is the same, whether the target is level 49 or level 50."
Let's shoot for the same 95% confidence target, so α = 0.05.

Using your data...
Lv 50: 8 procs in 108 opportunities
Lv 49: 6 procs in 45 opportunities

The resulting p-value is: p = 0.355. Since p > α, we fail to reject the null hypothesis.

In other words, NO, we cannot say from these results that the proc rate is different for level 49 vs level 50.


Hope that helps.


Oh, by the way:
Quote: Originally Posted by QisaBluevixen View Post
LFL in Alderaan Places
This has been my personal guild status note since launch.
You know... they say great minds think alike.

QisaBluevixen's Avatar


QisaBluevixen
02.02.2012 , 08:37 PM | #10
Well, there you go then. Statistically valid. Thanks Tibbel!

I got a response back to my in-game ticket thanking me for my valuable input. So I presume that means it's in their bug database anyhow. Maybe I'm being optomistic though.

BTW "LFL in Alderaan Places" is my guild name.
I don't have a picture because I don't exist ... officially.
Q'isa - Battlemaster Lethality Operative
Qisa Bluevixen - Centurion MM Sniper
LFL in Alderaan Places