Please upgrade your browser for the best possible experience.

Chrome Firefox Internet Explorer
×

The Infernal One (Soa) Discussion


Qcto's Avatar


Qcto
01.17.2012 , 04:53 PM | #11
Quote: Originally Posted by Artacks View Post
If you are double jumping shelves, you need to wait. Skipping any pylon will cause the shield to bug.

We've tested this theory extensively, and unless its been luck 100% of the time, this seems to be the fix.
They are referring to the big pieces dropping on soa in p3 to remove his shield I believe. Our tank would position him under it on his screen yet he will be a bit off for others and the rock will miss. If jumping down in order somehow relates to his shield not coming off in p3 when you drop something on him that could be some interesting info though.
The Hitchens Legacy | 50 Operative | 40 Mercenary | Daragon Trail

Wootle's Avatar


Wootle
01.17.2012 , 05:37 PM | #12
The pylons are definitely a pain in the *** when you are first learning the encounter, but as long as your raid are patient and give you the tries needed to learn it, then it becomes doable 100% of the time.

My advice for doing it is simply to position Soa in the centre of the room and watch for him pulling the pylon out of the wall. Don't start moving him immediately, as the pylon can sometimes have some lateral movement as it is inverting. Once you see the pylon is in almost at full tilt, you now have a lot better idea of which direction to run. Just run at the pylon and as you think you are under it, just spin and pan the camera up so you can see Soa and the Pylon and just manoeuvre backwards until you're sure he's under.

The only tricky really ones are when they are right at the edge as you have quite a distance to move him after waiting, then need to position Soa and then move to the side of the Pylon in case you're a wee bit close, so you don't get punted back into the lava when it drops (although a Sorc yoinked me out when this happened on our first kill!).

It just takes practise.