amopedvalar Posted February 13, 2013 Share Posted February 13, 2013 What crew skill(s) can craft different augments? Link to comment Share on other sites More sharing options...
HumanPirhana Posted February 13, 2013 Share Posted February 13, 2013 Armormech, Synthweaving and Armstech can each craft different kinds of augments Link to comment Share on other sites More sharing options...
Kimdar Posted February 14, 2013 Share Posted February 14, 2013 Armormech, Synthweaving and Armstech can each craft different kinds of augments How do I get augment schematics to craft them for armormech? Link to comment Share on other sites More sharing options...
Zorash Posted February 14, 2013 Share Posted February 14, 2013 How do I get augment schematics to craft them for armormech? You gain them from slicing missions. The schematics are really really cheap on the GTN, so don't even bother trying to get them from slicing. Link to comment Share on other sites More sharing options...
parmie Posted February 14, 2013 Share Posted February 14, 2013 Thats a bit contradictory, you need to run augment compent missions anyway just to get mats to make them, therefore you'll end up with those schematics without buying them from the GTN, but it depends if OP has slicing as well as one of those crafts. Link to comment Share on other sites More sharing options...
Technohic Posted February 14, 2013 Share Posted February 14, 2013 one of the links in the sticky: http://www.swtor.com/community/showthread.php?t=509963 Pretty much all you need is in there. I have used that to guide me through my crafting in order to craft all augments and slots I need to support 8 toons. Link to comment Share on other sites More sharing options...
psandak Posted February 14, 2013 Share Posted February 14, 2013 You gain them from slicing missions. The schematics are really really cheap on the GTN, so don't even bother trying to get them from slicing. The top level augment schematics are cheap yes, but anything below the highest ones can sell for a decent chunk of change. Not saying they will make you rich over night but when rank 22 schematics sell for less than a thousand and anything lower sells for 15k to 30k...that's significant. That being said, the top level sliced parts needed for the augments are also fairly cheap. So you you do not NEED the slicing crew skill if all you care about is the top end. Link to comment Share on other sites More sharing options...
finelinebob Posted February 17, 2013 Share Posted February 17, 2013 You gain them from slicing missions. The schematics are really really cheap on the GTN, so don't even bother trying to get them from slicing. If you have several slicing toons, running the missions (Sliced Tech Parts, crit on Rare Yields returns 2 schematics) is actually quite profitable. Anything other than a Augment 22 schematic will sell for 8-10k on my server. If you want all the schematics for your craft, it does take time. There are 84 Armormech, 105 Armstech and 105 Synthweaving Base (green) schematics, for a total of 294. It took me maybe6-8 weeks to get them all for my crafters. I ran missions until I had about 85% of them, then started buying up any on the GTN for less than 5k. When it got down to my last 10, I even offered up to 100k per schematic on my server's forum, but I got all 10 by running missions in about 1 week. Considering all the "doubles" I got of schematics I already knew, the sale of those more than paid for the number of missions I had to run. In fact, by the time number 294 arrived, all my slicing toons had 7-figure bank accounts. If you want to see what schematics are available and/or you want to keep track, I have a link to a spreadsheet I used to keep track of my own progress below (GoogleDoc). (And for the Maker's sake, people, please just vendor your Augment 22 schematics instead of trying to sell them for the default price!) Link to comment Share on other sites More sharing options...
Recommended Posts